ecos-discuss archive
date index for October, 2002

This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

October 31, 2002
21:58 Port eCos to iPAQ H3850 00917764d
20:23 Re: Re: How to generate the binay file Lin Ming
19:33 stubs and redboot building AL Chane
18:24 Re: Re: How to generate the binay file Lin Ming
15:40 Re: simultaneous socket write/close causes panic? Grant Edwards
14:21 Re: Help! Building ECOS Host Tools and ARM-ELF Libraries, latest anoncvs code, cygwin. Bart Veer
14:21 Re: simultaneous socket write/close causes panic? Bart Veer
14:21 Re: ecosconfig on linux problem Bart Veer
14:21 Re: Accessing config parameters in define_proc code Bart Veer
13:52 Re: Stack problem NavEcos
13:37 Stack problem Cusson, Pascal
13:14 Re: Okay,I got everything but configtool.exe built (GUI). Gary Thomas
13:11 Okay,I got everything but configtool.exe built (GUI). Warren Postma
13:01 Ecos v 2 Agarwal, Lomesh
12:03 RE: Is it possible to do polling for the Ethernetdriverusing a stack ? Gary Thomas
11:53 RE: Is it possible to do polling for the Ethernet driverusing a stack ? Cusson, Pascal
11:47 Re: Help! Building ECOS Host Tools and ARM-ELF Libraries, latest anoncvs code, cygwin. Warren Postma
11:45 RE: Is it possible to do polling for the Ethernetdriverusing a stack ? Gary Thomas
11:40 redboot and MIPS malta board Zhang
11:32 RE: Is it possible to do polling for the Ethernet driverusing a stack ? Cusson, Pascal
10:57 Re: Accessing config parameters in define_proc code Andrew Lunn
10:50 Re: Accessing config parameters in define_proc code Gary Thomas
10:44 Re: Help! Building ECOS Host Tools and ARM-ELF Libraries, latest anoncvs code, cygwin. Andrew Lunn
10:36 Accessing config parameters in define_proc code Andrew Lunn
10:35 Help! Building ECOS Host Tools and ARM-ELF Libraries, latest anoncvs code, cygwin. Warren Postma
09:09 RE: Is it possible to do polling for the Ethernet driverusing a stack ? David Webster
08:45 Re: server_test in vmware Iztok Zupet
08:03 RE: Is it possible to do polling for the Ethernet driverusing a stack ? Gary Thomas
07:56 RE: Is it possible to do polling for the Ethernet driver using a stack ? Cusson, Pascal
07:49 Re: pcmcia network driver for eCos on iPAQ Gary Thomas
07:47 RE: Is it possible to do polling for the Ethernet driverusing a stack ? Gary Thomas
07:43 Re: How to generate the binay file Tim Drury
07:41 Re: allocated memory NavEcos
07:37 Re: How to generate the binay file Tim Drury
07:33 RE: Is it possible to do polling for the Ethernet driver using a stack ? Cusson, Pascal
07:32 pcmcia network driver for eCos on iPAQ 00917764d
07:30 allocated memory NavEcos
07:24 Re: Is it possible to do polling for the Ethernet driverusing a stack ? Gary Thomas
07:04 Is it possible to do polling for the Ethernet driver using a stack ? Cusson, Pascal
06:42 server_test in vmware Vijai Krishnamurthy
05:31 redboot gets null termination Andrew Lunn
01:06 Re: SNMP and FreeBSD stack NavEcos
00:30 RE: SNMP and FreeBSD stack Retallack, Mark (Poole)
00:21 debugging using redboot on iPAQ Amit Tuljapurkar
00:21 Re: Serial ports on SA-1100 Andrew Lunn

October 30, 2002
17:19 How to generate the binay file Lin Ming
15:12 RE: Serial ports on SA-1100 Schumacher, Gordon
14:57 Serial ports on SA-1100 Schumacher, Gordon
13:08 RE: Ethernet stack question Cusson, Pascal
10:58 RE: Ethernet stack question Gary Thomas
10:55 RE: Ethernet stack question Cusson, Pascal
10:42 RE: Ethernet stack question Gary Thomas
10:40 RE: Ethernet stack question Cusson, Pascal
10:01 Re: SNMP and FreeBSD stack NavEcos
09:55 RE: memory layout Schumacher, Gordon
09:52 SNMP and FreeBSD stack Retallack, Mark (Poole)
09:52 Re: Ethernet stack question Gary Thomas
09:49 Ethernet stack question Cusson, Pascal
09:39 Re: eCos on NET+50 Peter Vandenabeele
06:26 Re: simultaneous socket write/close causes panic? Grant Edwards
06:23 Re: simultaneous socket write/close causes panic? Nick Garnett
04:52 Re: memory layout Chris Garry
01:09 memory layout AL Chane
00:40 Re: Platform Memory Layout Iztok Zupet
00:35 Platform Memory Layout AL Chane
00:31 Re: CVS docs Iztok Zupet
00:19 RE: CVS docs Koeller, T.

October 29, 2002
18:12 question about Kernel 2.4.18+MTD+Jffs2+redboot Roy Chung
16:00 Re: CVS docs Iztok Zupet
15:55 Re: simultaneous socket write/close causes panic? Nick Garnett
15:39 Re: simultaneous socket write/close causes panic? Bart Veer
14:59 Re: ecos vmWare Gregg C Levine
14:37 Re: simultaneous socket write/close causes panic? Grant Edwards
14:03 Re: CVS docs Bart Veer
14:03 Re: simultaneous socket write/close causes panic? Bart Veer
14:00 Re: Listing all running threads NavEcos
12:54 problem building ecos library on Windows XP Yin Bao
11:58 Re: how to link sevral *.o file into one *.o? max
11:35 ecosconfig on linux problem Henri
10:45 RE: how to link sevral *.o file into one *.o? Schumacher, Gordon
10:44 Re: simultaneous socket write/close causes panic? Nick Garnett
10:30 Re: ecos vmWare David N. Welton
10:19 Re: simultaneous socket write/close causes panic? Grant Edwards
10:16 Re: simultaneous socket write/close causes panic? Grant Edwards
06:47 Listing all running threads Tom Davis
06:46 Re: Listing all running threads Gary Thomas
06:38 Re: simultaneous socket write/close causes panic? Gary Thomas
06:31 Re: simultaneous socket write/close causes panic? Andrew Lunn
06:29 Re: ATMEL eb55 Redboot_RAM problem ! Pete Barrie
06:24 RE: ecos vmWare Vijai Krishnamurthy
06:01 Re: How to load Kernel from JFFS2-Partition with RedBoot Gary Thomas
04:47 How to load Kernel from JFFS2-Partition with RedBoot Thomas Rudolph
02:54 Re: ecos vmWare Iztok Zupet
01:50 ecos vmWare Vijai Krishnamurthy
01:39 Re: ATMEL eb55 Redboot_RAM problem ! Laurent Gonzalez
00:08 Re: simultaneous socket write/close causes panic? NavEcos
00:03 Re: To NavEcos NavEcos

October 28, 2002
23:36 Re: simultaneous socket write/close causes panic? Brij Bihari Pandey
23:31 some problems with thread.hxx li hui
23:20 Re: programming technic about the macro? sandeep
21:58 how to link sevral *.o file into one *.o? =?gb2312?B?1cUgwcE=?=
19:52 To NavEcos Vikram Mehta
18:57 ATMEL eb55 Redboot_RAM problem ! denis chmielewski
14:19 Re: programming technic about the macro? Gary Thomas
14:12 programming technic about the macro? Qiang Huang
13:44 Re: simultaneous socket write/close causes panic? Gary Thomas
13:42 Re: simultaneous socket write/close causes panic? Grant Edwards
13:38 Re: simultaneous socket write/close causes panic? Gary Thomas
13:32 simultaneous socket write/close causes panic? Grant Edwards
10:24 Re: Bewildered. Gary Thomas
10:21 Re: Bewildered. Holger Schurig
09:19 Re: Protecting RedBoot in the field Andrew Lunn
09:16 RE: Protecting RedBoot in the field Jay Foster
09:03 Re: Bewildered. Andrew Lunn
09:00 Re: Bewildered. Gary Thomas
08:58 RE: Bewildered. Ajay Dudani
08:51 Bewildered. Warren Postma
08:07 Re: Cygwin problem building (again) - newbie Bob Koninckx
08:01 RE: Problems when selecting the FREEBSD stack Cusson, Pascal
07:59 RE: Problems when selecting the FREEBSD stack Ajay Dudani
07:56 Problems when selecting the FREEBSD stack Cusson, Pascal
07:23 Re: Protecting RedBoot in the field Gary Thomas
07:17 Re: Protecting RedBoot in the field Andrew Lunn
07:13 Re: Protecting RedBoot in the field Gary Thomas
07:11 Re: Building ecos: newbie Gary Thomas
07:04 Re: Re: problems in the patch Gary Thomas
06:58 Re: problems in the patch Tim Drury
05:19 Re: Building ecos: newbie Praveen Kumar
03:06 Re: RealTek 8139 Redboot i386 Chris Paulson-Ellis
02:59 Re: Protecting RedBoot in the field Daniel Morris
02:31 Protecting RedBoot in the field Andrew Lunn
01:40 Re: RealTek 8139 Redboot i386 Iztok Zupet
01:14 RealTek 8139 Redboot i386 Vijai Krishnamurthy
00:02 where trace and assert run? =?gb2312?B?1cUgwcE=?=

October 27, 2002
22:56 CVS docs Iztok Zupet
20:39 question about redboot CF ethernet driver for lubbock Roy Chung
20:35 Compilation Errors in some of the test progs. Vijai Krishnamurthy
18:46 Re: Re: Downloaded image of Redboot Not Working NavEcos
06:25 Cygwin problem building (again) - newbie Sérgio Duarte e Silva
02:58 Re: Downloaded image of Redboot Not Working Chris Garry

October 26, 2002
22:47 errors in ecos patch again... max kuo
21:10 Re: Re: Downloaded image of Redboot Not Working Vikram Mehta
20:36 Re: Downloaded image of Redboot Not Working NavEcos
20:29 Downloaded image of Redboot Not Working Vikram Mehta
08:28 Re: Building ecos: newbie Praveen Kumar
08:21 Re: What IS ROMRAM startup for E7t. Jonathan Larmour
07:06 Re: Building ecos: newbie Gary Thomas
04:01 Re: Building ecos: newbie Praveen Kumar

October 25, 2002
23:09 Re: What IS ROMRAM startup for E7t. Iztok Zupet
22:59 What IS ROMRAM startup for E7t. Vikram Mehta
18:35 Re: eCos build problem - wrong path for repository Peter Vandenabeele
17:36 Re: eCos build problem - wrong path for repository Jonathan Larmour
15:45 Re: Re: Which Stack should I use ? Gary Thomas
15:43 RE: Building Redboot Test cases Gary Thomas
15:32 Re: Which Stack should I use ? Daniel Néri
14:17 RE: Building Redboot Test cases Rycerz Roman-G11565
14:08 Re: Building Redboot Test cases Gary Thomas
14:00 Building Redboot Test cases Rycerz Roman-G11565
13:54 Re: New to eCOS and tool building, problem building a crossgdb on cygwin using gdb sources downloaded via cygwin's setup.exe Gary Thomas
13:40 New to eCOS and tool building, problem building a cross gdb on cygwin using gdb sources downloaded via cygwin's setup.exe Warren Postma
13:32 Re: Which Stack should I use ? Gary Thomas
12:55 Which Stack should I use ? Cusson, Pascal
09:30 Re: eCos build problem - wrong path for repository Peter Vandenabeele
08:26 RE: Is it possible to convert *.out file to *.srec file? Cusson, Pascal
08:20 Re: Is it possible to convert *.out file to *.srec file? Andrew Lunn
08:12 Re: Re: HAL_PLATFORM_RESET Tim Drury
07:59 RE: Is it possible to convert *.out file to *.srec file? Qiang Huang
07:56 Re: Re: HAL_PLATFORM_RESET Tim Drury
07:18 Re: Is it possible to convert *.out file to *.srec file? Grant Edwards
07:12 Re: Is it possible to convert *.out file to *.srec file? Jonathan Larmour
07:10 Re: Is it possible to convert *.out file to *.srec file? Grant Edwards
07:08 Re: Is it possible to convert *.out file to *.srec file? Grant Edwards
06:10 RE: Is it possible to convert *.out file to *.srec file? Gary Thomas
06:09 Re: Is it possible to convert *.out file to *.srec file? Jonathan Larmour
06:07 RE: downloading of application in assabet Gary Thomas
06:05 RE: Is it possible to convert *.out file to *.srec file? Qiang Huang
06:05 Re: Dose redboot support NEC VR4122/VR4131 CPU? Jonathan Larmour
06:03 Re: C++ Object constructor question? Jonathan Larmour
05:57 Re: Is it possible to convert *.out file to *.srec file? Jonathan Larmour
05:47 Re: Quick and stupid question RE: dlmalloc Jonathan Larmour
05:21 Re: question about root file system!! Gary Thomas
04:16 RE: Is it possible to convert *.out file to *.srec file? Qiang Huang
03:50 C++ Object constructor question? Qiang Huang
03:26 Quick and stupid question RE: dlmalloc NavEcos
03:21 RE: Is it possible to convert *.out file to *.srec file? Andy Simpkins
02:56 Dose redboot support NEC VR4122/VR4131 CPU? Aric
02:18 server and ping test kuntjoro pinardi
01:58 Is it possible to convert *.out file to *.srec file? Qiang Huang
01:21 Re: HAL_PLATFORM_RESET Daniel Néri
01:19 question about root file system!! Roy Chung

October 24, 2002
22:33 Re: eCos Kernel: ALLOC callbacks NavEcos
21:54 Re: HAL_PLATFORM_RESET Jonathan Larmour
21:48 Re: Redboot general and Question for EB55 Jonathan Larmour
21:46 Re: downloading of application in assabet Jonathan Larmour
20:24 Re: eCos Kernel: ALLOC callbacks Jonathan Larmour
20:22 RE: downloading of application in assabet Mildred Frisco
15:48 Re: Redboot general and Question for EB55 Gary Thomas
15:39 Re: Redboot general and Question for EB55 Christophe Part
15:16 Re: Redboot general and Question for EB55 Gary Thomas
15:08 Redboot general and Question for EB55 Christophe Part
14:26 Re: Re: EB40 epk patch Gary Thomas
14:13 Re: EB40 epk patch Thomas Koeller
13:18 Re: HAL_PLATFORM_RESET Gary Thomas
13:12 HAL_PLATFORM_RESET Tim Drury
12:22 Re: objcopy error in redboot makefile Jonathan Larmour
10:28 Re: Is this port available (Excalibur EPXA1 development board (http://www.altera.com/corporate/promotions/specials/epxa1/spc-epxa1.html))? Thank you. Nick Garnett
10:15 Re: objcopy error in redboot makefile Henri
09:25 Poll: dhrystone test results llandre
09:22 Re: redboot RAM and it's memory address Holger Schurig
09:21 Re: redboot RAM and it's memory address Holger Schurig
09:21 Re: redboot RAM and it's memory address Holger Schurig
09:21 Re: redboot RAM and it's memory address Holger Schurig
08:49 Re: More newbie questions... Gary Thomas
08:46 More newbie questions... Jon Read
07:52 Re: redboot RAM and it's memory address Mark Salter
07:39 Re: regarding hal_interrupt_stack_call_pending_DSRs call Brij Bihari Pandey
07:37 Re: Building ecos,ct,wx: newbie Jonathan Larmour
07:34 Re: redboot RAM and it's memory address Jonathan Larmour
07:27 Re: MPC555 kernel - newbie Jonathan Larmour
07:24 Re: downloading of application in assabet Jonathan Larmour
07:22 Re: port eCos to sh7709s custom board Jonathan Larmour
06:54 Re: Cannot apply patch in ecos Jonathan Larmour
06:49 Re: Building ecos,ct,wx: newbie Gary Thomas
06:48 Re: Is this port available (Excalibur EPXA1 development board(http://www.altera.com/corporate/promotions/specials/epxa1/spc-epxa1.html))?Thank you. Jonathan Larmour
06:30 Re: regarding hal_interrupt_stack_call_pending_DSRs call Nick Garnett
06:30 Re: Query Nick Garnett
05:49 Re: Cannot apply patch in ecos max kuo
05:48 Re: objcopy error in redboot makefile Mark Salter
05:36 Re: TCP/IP stack: robustness agains port scan llandre
05:36 Re: Maximum number of TCP connections llandre
05:24 Re: downloading of application in assabet Iztok Zupet
04:10 Re: TCP/IP stack: robustness agains port scan Andrew Lunn
03:42 Re: TCP/IP stack: robustness agains port scan Andrew Lunn
03:36 Re: Maximum number of TCP connections Andrew Lunn
03:32 Re: TCP/IP stack: robustness agains port scan llandre
03:32 Re: Maximum number of TCP connections llandre
03:32 RE: Is this port available (Excalibur EPXA1 development board (http://www.altera.com/corporate/promotions/specials/epxa1/spc-epxa1.html))? Thank you. Qiang Huang
03:31 Building ecos,ct,wx: newbie Praveen Kumar
03:10 Re: TCP/IP stack: robustness agains port scan Andrew Lunn
03:08 Re: Maximum number of TCP connections Andrew Lunn
03:06 TCP/IP stack: robustness agains port scan llandre
02:58 Maximum number of TCP connections llandre
02:53 Re: Is this port available (Excalibur EPXA1 development board (http://www.altera.com/corporate/promotions/specials/epxa1/spc-epxa1.html))? Thank you. Nick Garnett
02:48 redboot RAM and it's memory address Holger Schurig
02:37 Re: downloading of application in assabet Andrew Lunn
02:27 RE: downloading of application in assabet Mildred Frisco
01:37 Re: MPC555 kernel - newbie Bob Koninckx
01:24 Query ecos dev
01:19 Re: How to add a source file into a configuration Yao-Lu Tsai
01:07 Re: CPU usage by threads Andrew Lunn
00:11 CPU usage by threads Daniel Lidsten

October 23, 2002
23:44 Re: downloading of application in assabet Iztok Zupet
23:33 RE: downloading of application in assabet Mildred Frisco
23:25 Re: downloading of application in assabet Iztok Zupet
23:04 Re: eCos Kernel: ALLOC callbacks NavEcos
22:25 port eCos to sh7709s custom board Cho, JinJe (FXKIS.KOR)
22:22 Re: eCos build problem - wrong path for repository Jonathan Larmour
22:14 Re: Error while executing build Jonathan Larmour
22:11 Re: software reset Jonathan Larmour
22:06 Re: query reg graphics Jonathan Larmour
21:59 Re: redboot for i386 pc target Jonathan Larmour
21:58 Re: Is this port available (Excalibur EPXA1 development board(http://www.altera.com/corporate/promotions/specials/epxa1/spc-epxa1.html))?Thank you. Jonathan Larmour
21:57 Re: Detect if scheduler locked? Grant Edwards
21:51 Re: PPP support in eCOS Jonathan Larmour
21:46 Re: Redboot Ram Access Jonathan Larmour
21:41 Re: Cannot apply patch in ecos Jonathan Larmour
21:35 Re: mipsisa32-elf-gcc is not able to find the std headers Michael Anburaj
21:33 Re: thread destructors Jonathan Larmour
21:20 Re: Error result of window ecos Jonathan Larmour
21:18 Re: connect problem in lwip Jonathan Larmour
20:52 Re: downloading of application in assabet Jonathan Larmour
20:50 Re: Loading Program On Evaluator-7t using BSL Jonathan Larmour
20:48 RE: Cannot apply patch in ecos MAX Kuo
20:44 Re: Detect if scheduler locked? Jonathan Larmour
20:39 Re: ecos / rtems Jonathan Larmour
20:35 Re: gcc versions? Jonathan Larmour
20:34 Re: Some questions Jonathan Larmour
20:28 Re: How to add a source file into a configuration Jonathan Larmour
20:25 Re: gcc versions? Gregg C Levine
20:24 Re: eCos Kernel: ALLOC callbacks Jonathan Larmour
20:19 Re: Cannot apply patch in ecos Jonathan Larmour
20:18 Re: read and write to standerd IO Jonathan Larmour
20:05 Re: how to solve these compile error? Jonathan Larmour
19:58 Re: how does the scheduler lock works when the DSR is interruptedby ext IRQ? Jonathan Larmour
19:48 Re: mipsisa32-elf-gcc is not able to find the std headers Jonathan Larmour
19:43 Re: Ethernet Driver hooking problem Jonathan Larmour
19:37 Re: objcopy error in redboot makefile Jonathan Larmour
19:34 Re: gcc versions? Jonathan Larmour
16:39 gcc versions? Gregg C Levine
14:00 objcopy error in redboot makefile Henri
13:03 RE: Ethernet Driver hooking problem Cusson, Pascal
11:36 Re: Ethernet Driver hooking problem Gary Thomas
11:17 Ethernet Driver hooking problem Cusson, Pascal
08:52 Re: regarding hal_interrupt_stack_call_pending_DSRs call Brij Bihari Pandey
08:49 EB40 epk patch Christophe Part
07:29 ecos/rtems comparison Carlton Haycock
06:23 Re: Load arbitrary code on iPaq using RedBoot? Gary Thomas
06:04 Re: Load arbitrary code on iPaq using RedBoot? Jon Read
05:52 RE: downloading of application in assabet Gary Thomas
05:51 Re: Load arbitrary code on iPaq using RedBoot? Gary Thomas
05:44 Re: Some questions Gary Thomas
05:43 Load arbitrary code on iPaq using RedBoot? Jon Read
05:37 Re:Re Sending broadcast trap matto
05:17 Re: MPC555 kernel - newbie Bob Koninckx
03:57 Re: Sending broadcast trap matto
03:49 MPC555 kernel - newbie Sérgio Duarte e Silva
03:36 Re: Sending broadcast trap Andrew Lunn
03:32 Sending broadcast trap matto
03:11 mipsisa32-elf-gcc is not able to find the std headers Michael Anburaj
01:48 how does the scheduler lock works when the DSR is interrupted by ext IRQ? Qiang Huang
01:33 Re: How to add a source file into a configuration Andrew Lunn
01:06 How to add a source file into a configuration Yao-Lu Tsai
00:37 how to solve these compile error? li hui
00:28 Re: warning: no memory region specified ... Andrew Lunn
00:22 Re: eCos Flash Driver Configuration Andrew Lunn
00:21 Re: warning: no memory region specified ... Holger Schurig

October 22, 2002
22:48 read and write to standerd IO Satoshi Sasaki
20:57 question about red-boot for lubbock!! Roy Chung
20:38 Cannot apply patch in ecos MAX Kuo
20:09 RE: downloading of application in assabet Mildred Frisco
18:40 eCos Kernel: ALLOC callbacks NavEcos
15:27 Some questions Agarwal, Lomesh
15:22 eCos Flash Driver Configuration Jay Foster
11:22 ecos / rtems Carlton Haycock
09:03 Re: Detect if scheduler locked? Grant Edwards
08:45 Re: Detect if scheduler locked? Andrew Lunn
08:39 Re: Detect if scheduler locked? Grant Edwards
08:32 Re: Detect if scheduler locked? Andrew Lunn
08:30 Re: Detect if scheduler locked? Gary Thomas
08:25 Re: Small #include question Gary Thomas
08:24 Re: Small #include question Andrew Lunn
08:23 Re: Small #include question Chris Garry
08:21 Re: Small #include question david
08:20 Detect if scheduler locked? Grant Edwards
08:15 Small #include question Cusson, Pascal
07:25 Re: warning: no memory region specified ... Andrew Lunn
07:21 Re: warning: no memory region specified ... Holger Schurig
06:45 RE: downloading of application in assabet Patrick Doyle
06:24 Re: warning: no memory region specified ... Andrew Lunn
06:21 warning: no memory region specified ... Holger Schurig
05:59 Re: downloading of application in assabet Gary Thomas
05:57 Re: question about red-boot!! Gary Thomas
05:51 Re: Port eCos on Samsung's MDK41100 DEMO board with ARM7TDMIcore Gary Thomas
04:28 Changing of ROMCON0 on Eval-7t Vikram Mehta
03:52 Loading Program On Evaluator-7t using BSL Vikram Mehta
03:19 Re: updated AT91/EB40 hal Daniel Néri
03:09 Re: ping packet length Jani Monoses
03:04 ping packet length Vinayak P Risbud
02:23 downloading of application in assabet Mildred Frisco

October 21, 2002
23:10 question about red-boot!! Roy Chung
22:53 Port eCos on Samsung's MDK41100 DEMO board with ARM7TDMI core AL Chane
21:35 connect problem in lwip vikal jain
21:27 Re: Error result of window ecos Gary Thomas
19:26 Error result of window ecos MAX Kuo
18:08 RE: downloading of application in assabet Mildred Frisco
12:31 RE: ATMEL 8051 8-bit + linux Patel, HImanshu
10:44 eCos Book and Articles Anthony Massa
10:34 RE: Samsung SNDS100 Eval. Board... Jay Foster
08:51 Re: isr() and dsr() running environment? Peter Vandenabeele
07:54 Re: isr() and dsr() running environment? Nick Garnett
07:30 thread destructors Makarov
06:31 few test patches for ecos-SMP sandeep
04:41 Redboot Ram Access Erdem Guven
04:36 redboot on ipaq h3600 Amit Tuljapurkar
04:36 redboot on ipaq h3600 Amit Tuljapurkar
04:35 redboot on ipaq h3600 Amit Tuljapurkar
04:31 RE: Re: updated AT91/EB40 hal Koeller, T.
04:30 PPP support in eCOS Vishal Karnik
03:52 Is this port available (Excalibur EPXA1 development board (http://www.altera.com/corporate/promotions/specials/epxa1/spc-epxa1.html))? Thank you. jameshq
03:50 redboot for i386 pc target srinivasp42
03:48 RE: isr() and dsr() running environment? jameshq
03:38 query reg graphics SPRAO
02:40 Re: why i can't link my lib Ben Elliston
02:35 downloading of application in assabet Mildred Frisco
01:38 why i can't link my lib =?gb2312?B?1cUgwcE=?=
01:00 Re: EMBEDDED and OPERATING SYSTEMS track at FOSDEM 2003 Andrew Lunn
00:35 Re: Insight over network for E7T Andrew Lunn

October 20, 2002
22:47 Proplem MAX Kuo
21:09 software reset Vinayak P Risbud
18:47 downloading of application in assabet Mildred Frisco
18:39 Re: updated AT91/EB40 hal Christophe Part
17:50 EMBEDDED and OPERATING SYSTEMS track at FOSDEM 2003 Gary Thomas
07:48 Re: ATMEL 8051 8-bit + linux Scott Dattalo
06:08 RE: Correction on serial driver hooks Cusson, Pascal
05:19 updated AT91/EB40 hal Thomas Koeller
04:35 Re: Insight over network for E7T Chris Garry
04:04 Error while executing build vishal
02:11 Re: ATMEL 8051 8-bit + linux Iztok Zupet
00:54 ATMEL 8051 8-bit + linux Karthik Bala Guru

October 19, 2002
19:35 BUSINESS PROPOSITION tun_de
12:24 Re: eCos presentation Peter Vandenabeele
07:10 Re: eCos build problem - wrong path for repository Peter Vandenabeele
04:35 Re: eCos on NET+50 Peter Vandenabeele
02:21 Re: JFFS2 filesystem and eCos code on the same chip? Peter Vandenabeele

October 18, 2002
21:54 Re: Insight over network for E7T Jonathan Larmour
21:52 Re: JFFS2 filesystem and eCos code on the same chip? Jonathan Larmour
21:48 Re: Is the Real Time Clock constructed by calling to cyg_hal_invoke_constructors()? Jonathan Larmour
21:35 Re: ecos configuration and install directory Jonathan Larmour
21:31 Re: Cheapest platform Jonathan Larmour
21:20 Re: EB40/AT91 and EB40A Patches Jonathan Larmour
21:17 Re: thumb code Jonathan Larmour
21:17 Re: libm on SH7750. Jonathan Larmour
21:07 Re: thumb code Jonathan Larmour
21:03 Re: problem in ecos! Jonathan Larmour
21:01 Re: question about redboot...... Jonathan Larmour
20:59 Re: eCos on NET+50 Jonathan Larmour
20:57 Re: edb7xxx patches Jonathan Larmour
19:37 IBM PowerPC 740 port Peter Dennett
15:03 Re: EB40/AT91 and EB40A Patches Greg Holdren
12:20 Re: PCI network cards/drivers Gary Thomas
11:59 PCI network cards/drivers Kevin Hilman
11:27 RE: Custom hardware? Schumacher, Gordon
11:25 Re: Custom hardware? Gary Thomas
11:18 Custom hardware? Schumacher, Gordon
10:45 RE: Help needed for integration of my own serial driver ??? Cusson, Pascal
10:03 Sesso ma vero... Giada
09:42 Re: EB40/AT91 and EB40A Patches Tim Drury
08:40 RE: EB40/AT91 and EB40A Patches Christophe Part
08:32 Re: Error while executing patch Jonathan Larmour
07:28 Re: EB40/AT91 and EB40A Patches Tim Drury
06:38 Re: problem in ecos! Gary Thomas
06:23 Re: isr() and dsr() running environment? Jonathan Larmour
05:50 Error while executing patch vishal
05:45 Re: edb7xxx patches Peter Dennett
05:27 RE: isr() and dsr() running environment? Gary Thomas
05:14 Re: EB40/AT91 and EB40A Patches Roman Jordan
05:00 Re: ROM and hardware vectors for ARM. Mark Salter
04:09 RE: isr() and dsr() running environment? Qiang Huang
04:08 edb7xxx patches Jani Monoses
02:45 eCos on NET+50 Olaf Peters
01:56 RE: isr() and dsr() running environment? Qiang Huang
00:44 RE: ROM and hardware vectors for ARM. Jesper Kjeldsen
00:37 Re: EB40/AT91 and EB40A Patches Greg Holdren
00:34 question about redboot...... Roy Chung

October 17, 2002
23:49 Re: To Ryan Press C.Y Kuo
23:39 problem in ecos! MAX Kuo
20:59 Re: Re: Command to generate a patch Jonathan Larmour
20:58 Re: KS32C5000 ethernet driver endianess Jonathan Larmour
20:56 Re: gdb stub execute check Jonathan Larmour
20:43 Re: Help needed for integration of my own serial driver ??? Jonathan Larmour
20:32 Re: isr() and dsr() running environment? Jonathan Larmour
19:10 Re: Samsung SNDS100 Eval. Board... Yao-Lu Tsai
18:31 Re: libm on SH7750. ryosuke-tajima
15:22 RE: Correction on serial driver hooks Gary Thomas
14:42 RE: Correction on serial driver hooks Cusson, Pascal
14:22 Re: Correction on serial driver hooks Gary Thomas
14:11 isr() and dsr() running environment? jameshq
14:05 Correction on serial driver hooks Cusson, Pascal
12:40 Help needed for integration of my own serial driver ??? Cusson, Pascal
09:14 gdb stub execute check Yoshinori Sato
08:51 KS32C5000 ethernet driver endianess Chris Garry
08:28 Re: Command to generate a patch Andrew Lunn
08:26 Re: EB40/AT91 and EB40A Patches Greg Holdren
08:13 RE: Ethernet & serial problem Gary Thomas
08:07 RE: Ethernet & serial problem Daniel Lidsten
07:55 Re: To Ryan Press Ryan Press
07:48 RE: Ethernet & serial problem Gary Thomas
07:48 Re: Samsung SNDS100 Eval. Board... Grant Edwards
07:44 RE: Ethernet & serial problem Daniel Lidsten
07:40 Re: thumb code Gary Thomas
07:35 Re: thumb code Vinayak P Risbud
07:32 Re: EB40/AT91 and EB40A Patches Tim Drury
07:31 Re: thumb code Vinayak P Risbud
07:19 Re: thumb code Gary Thomas
07:18 Re: ROM and hardware vectors for ARM. Gary Thomas
07:12 ROM and hardware vectors for ARM. Erik Aagaard Knudsen
07:10 RE: help Cusson, Pascal
06:54 Re: Rép. : thumb code Vinayak P Risbud
06:50 Re: Rép. : thumb code Vinayak P Risbud
06:43 Rép. : thumb code Marc Pignat
06:36 thumb code Vinayak P Risbud
06:07 libm on SH7750. ryosuke-tajima
06:03 Re: Ethernet & serial problem Gary Thomas
05:32 Ethernet & serial problem Daniel Lidsten
02:41 EB40/AT91 and EB40A Patches Greg Holdren
01:46 Re: Cheapest platform Jani Monoses
00:25 Re: Still on ethernet configuration Andrew Lunn

October 16, 2002
18:55 Re: Samsung SNDS100 Eval. Board... Yao-Lu Tsai
17:39 RE: help Cusson, Pascal
12:26 Re: Still on ethernet configuration Gary Thomas
11:50 Re: Cheapest platform Peter Vandenabeele
11:33 Re: Still on ethernet configuration Cristiano Pereira
10:58 RE: ARM AT91EB63 port James
09:39 RE: Samsung SNDS100 Eval. Board... Jay Foster
08:36 RE: which priority will suit rtc clock? Qiang Huang
08:31 Re: Still on ethernet configuration Gary Thomas
08:19 RE: Way of developing new port? Robert Cragie
08:18 Re: Still on ethernet configuration Cristiano Pereira
08:09 RE: which priority will suit rtc clock? Gary Thomas
08:06 Re: which priority will suit rtc clock? Grant Edwards
07:59 RE: which priority will suit rtc clock? Qiang Huang
07:42 Re: which priority will suit rtc clock? Gary Thomas
07:39 which priority will suit rtc clock? Qiang Huang
07:28 Re: Still on ethernet configuration Gary Thomas
06:31 Cheapest platform Eric Lavigne
06:14 Re: Ecos in EB55..for help Tim Drury
06:06 Way of developing new port? Qiang Huang
06:01 Re: eCOS configuration Gary Thomas
05:49 To Ryan Press C.Y
05:22 Sexletter Titty
03:41 Re: eCOS configuration Simon Sudler
03:17 Re: ARM AT91EB63 port Daniel Néri
00:37 Re: Still on ethernet configuration Andrew Lunn

October 15, 2002
23:06 eCOS configuration Mildred Frisco
22:26 Ecos in EB55..for help MAX Kuo
21:27 Re: Still on ethernet configuration Cristiano Pereira
20:02 ecos configuration and install directory Mildred Frisco
19:23 Re: Re: ARM AT91EB63 port Tim Drury
18:51 Re: Samsung SNDS100 Eval. Board... Yao-Lu Tsai
16:21 Re: ARM AT91EB63 port Daniel Néri
14:20 Re: Samsung SNDS100 Eval. Board... Grant Edwards
13:38 Re: Still on ethernet configuration Gary Thomas
13:33 Re: Still on ethernet configuration Cristiano Pereira
13:26 FIQ handling Agarwal, Lomesh
13:13 RE: Samsung SNDS100 Eval. Board... Jay Foster
12:09 Re: ARM AT91EB63 port Ryan Press
11:49 printf and diag_prinft procedure needed ? Cusson, Pascal
11:30 Re: Still on ethernet configuration Gary Thomas
11:28 Re: Samsung SNDS100 Eval. Board... Grant Edwards
11:26 Re: Still on ethernet configuration Cristiano Pereira
10:14 Re: I have problem memory-access in Redboot Gary Thomas
10:11 I have problem memory-access in Redboot ddanggi
09:56 Re: ARM AT91EB63 port Daniel Leu
09:43 Re: to tim drury Tim Drury
09:25 RE: JFFS2 filesystem and eCos code on the same chip? Gary Thomas
09:17 RE: JFFS2 filesystem and eCos code on the same chip? Jay Foster
07:47 Re: to tim drury Tim Drury
06:52 Re: Re: JFFS2 filesystem and eCos code on the same chip? Gary Thomas
06:49 Re: JFFS2 filesystem and eCos code on the same chip? llandre
06:45 Is the Real Time Clock constructed by calling to cyg_hal_invoke_constructors()? Qiang Huang
06:37 Re: JFFS2 filesystem and eCos code on the same chip? Gary Thomas
06:28 Re: JFFS2 filesystem and eCos code on the same chip? Andrew Lunn
06:24 JFFS2 filesystem and eCos code on the same chip? llandre
06:08 Re: If delay() function is called in an isr() with interruptdisabled... Gary Thomas
06:07 RE: Cache Problem on TQ850 Gary Thomas
06:02 Re: Cant get test-cases to return to redboot Gary Thomas
05:57 Re: Which ARM7 HAL to emulate? Gary Thomas
04:58 Samsung SNDS100 Eval. Board... Jones, Michael
04:34 Insight over network for E7T Chris Garry
04:25 If delay() function is called in an isr() with interrupt disabled... Qiang Huang
03:55 to tim drury max kuo
03:31 RE: Cache Problem on TQ850 Daniel Lidsten
02:34 Cache Problem on TQ850 Retallack, Mark (Poole)
02:11 who can tell me what the binary(.bin and .exe)file format is? =?gb2312?B?1cUgwcE=?=
01:53 Serial port configuration Daniel Lidsten
00:44 Re: Still on ethernet configuration Andrew Lunn

October 14, 2002
22:40 Cant get test-cases to return to redboot Tim Drury
21:46 Re: mismatch address pointers in the cyg_mbox_put() T Satish Kumar
19:54 mismatch address pointers in the cyg_mbox_put() T Satish Kumar
19:44 Which ARM7 HAL to emulate? Grant Edwards
17:14 port ecos sh7709s custom board Cho, JinJe (FXKIS.KOR)
15:32 Re: ARM AT91EB63 port Tim Drury
15:15 FIQ handling Agarwal, Lomesh
14:13 ARM AT91EB63 port Ryan Press
10:52 Re: eCos for IOP321 running under simulator? Mark Salter
10:49 Re: When should I setup the stack pointer? Nick Garnett
10:49 Re: Will register window mechanism slow down the execution of ecos program for SPARC? Nick Garnett
10:46 Re: regarding hal_interrupt_stack_call_pending_DSRs call Nick Garnett
10:45 eCos for IOP321 running under simulator? Rick Richardson
10:11 Re: Stop button on Insight Chris Garry
08:34 RE: Stop button on Insight Cusson, Pascal
08:03 Re: RedBoot licensing question Grant Edwards
07:55 Re: RedBoot licensing question Andrew Lunn
07:45 Re: RedBoot licensing question Grant Edwards
06:17 monitor in ecos max kuo
03:23 regarding hal_interrupt_stack_call_pending_DSRs call Brij Bihari Pandey
03:03 When should I setup the stack pointer? Qiang Huang
02:15 Stop button on Insight Chris Garry
02:00 time_t overflow problem Erik Aagaard Knudsen
01:23 RE: Will register window mechanism slow down the execution of ecos program for SPARC? Qiang Huang
00:37 Re: RedBoot licensing question Andrew Lunn

October 13, 2002
20:02 Samsung SNDS ROM Image Yao-Lu Tsai
18:25 Re: RedBoot licensing question Grant Edwards
18:22 Re: RedBoot licensing question Grant Edwards
18:16 Re: RedBoot licensing question Gary Thomas
16:49 Re: RedBoot licensing question Peter Vandenabeele
11:17 RedBoot licensing question Grant Edwards

October 12, 2002
22:42 Re: Still on ethernet configuration Cristiano Pereira
11:44 CVS docs in PDF built Iztok Zupet
05:55 atmel boards and ecos Roman Jordan
04:13 Re: Download a RedBoot on AT91 Roman Jordan

October 11, 2002
13:25 Re: MPC8xx FEC Ethernet driver bugfixes/improvements Gary Thomas
11:59 Re: Download a RedBoot on AT91 Tim Drury
11:01 Re: Download a RedBoot on AT91 GREGHOL
10:32 Re: Will register window mechanism slow down the execution of ecos program for SPARC? Nick Garnett
10:14 Re: Download a RedBoot on AT91 Tim Drury
09:30 Download a RedBoot on AT91 Christophe Part
09:24 Re: Is possible to make delay function less than one clocktick delay in ecos program? Gary Thomas
09:21 Is possible to make delay function less than one clock tick delay in ecos program? Qiang Huang
08:01 Re: SPAM filter Tom Marshall
07:50 Re: Final network build problem Chris Garry
07:43 Re: 82559 Self Test failure H Girard
07:10 Re: what is FLYCNFG on XScale? Jeff Sutherland
05:48 RE: Loading linux image through redboot. Ian Campbell
05:26 RE: Loading linux image through redboot. Shailesh Dixit , Noida
05:19 LXT972 PHY support for Samsung KS32C5000 ethernet driver Chris Garry
05:19 Re: Final network build problem Andrew Lunn
05:12 RE: Loading linux image through redboot. Ian Campbell
05:01 CVS Docs - PDF problem Iztok Zupet
04:52 RE: Loading linux image through redboot. Koeller, T.
04:49 RE: error in memchr in compiling eCOS for assabet Koeller, T.
04:35 Final network build problem Chris Garry
04:30 Re: what is FLYCNFG on XScale? Andrew Lunn
04:25 Re: Loading linux image through redboot. Ian Campbell
04:21 what is FLYCNFG on XScale? Holger Schurig
04:09 Re: error in memchr in compiling eCOS for assabet Andrew Lunn
04:08 Re: porting guide Roman Jordan
04:02 Loading linux image through redboot. Shailesh Dixit , Noida
03:59 RE: error in memchr in compiling eCOS for assabet Koeller, T.
03:38 Re: error in memchr in compiling eCOS for assabet Andrew Lunn
03:35 Re: error in memchr in compiling eCOS for assabet MIldred Frisco
02:26 SPAM filter Iztok Zupet
02:22 RE: Will register window mechanism slow down the execution of ecos program for SPARC? Qiang Huang
02:00 URGENT ASSISTANCE IS NEEDED FORTUNE MGOMENI
00:53 MPC8xx FEC Ethernet driver bugfixes/improvements Wolfgang Heppner
00:36 Re: error in memchr in compiling eCOS for assabet Andrew Lunn
00:33 error in memchr in compiling eCOS for assabet MIldred Frisco
00:15 Re: compile new c file Andrew Lunn
00:13 Re: compile new c file Vinayak P Risbud

October 10, 2002
23:59 Re: compile new c file Andrew Lunn
23:56 compile new c file Vinayak P Risbud
23:00 Re: How can I make small delay < 1[ms]? Iztok Zupet
22:39 How can I make small delay < 1[ms]? ryosuke-tajima
20:01 RE: Memory access in a loop peter_ku
19:00 Re: porting guide Yao-Lu Tsai
18:37 Re: eCos Build Output Gary Thomas
18:33 eCos Build Output Jay Foster
17:14 Re: printf in Redboot/GDB Gary Thomas
17:11 Re: printf in Redboot/GDB Scott Dattalo
16:52 Re: Still on ethernet configuration Gary Thomas
16:44 Still on ethernet configuration Cristiano Pereira
16:44 Re: printf in Redboot/GDB Gary Thomas
16:40 printf in Redboot/GDB Scott Dattalo
11:51 Re: Will register window mechanism slow down the execution of ecos program for SPARC? Nick Garnett
11:48 Re: E7t and ethernet Chris Garry
11:25 Re: porting guide Iztok Zupet
10:36 Re: porting guide Roman Jordan
09:51 Re: at91eb55 Tim Drury
09:36 Re: porting guide Andrew Lunn
09:35 Re: E7t and ethernet Chris Garry
09:32 porting guide Roman Jordan
09:31 Re: at91eb55 Andrew Lunn
09:29 Re: at91eb55 Roman Jordan
08:46 Re: E7t and ethernet Grant Edwards
08:39 Re: Re: Bug in crc32 routine? Mark Salter
08:26 Re: Re: Bug in crc32 routine? Andrew Lunn
08:17 Re: Re: Bug in crc32 routine? Gary Thomas
08:07 Re: Bug in crc32 routine? Andrew Lunn
07:45 Re: E7t and ethernet Gary Thomas
07:43