This is the mail archive of the cygwin@cygwin.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: Cron runs, but commands are not executing.


Igor, 
Using full paths did it, thank you very much for the assistance.

Blake Thompson
Technical Team Lead,
Fidelity Web Services
Raleigh, NC

PH:      919.784.0924
EMAIL:   blake.thompson@fmr.com
AOL IM:  FescoBlaketh

"Trust, but verify."  - Russian Proverb


>-----Original Message-----
>From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu] 
>Sent: Wednesday, November 26, 2003 3:01 PM
>To: Thompson, Blake
>Cc: cygwin@cygwin.com
>Subject: Re: Cron runs, but commands are not executing.
>
>
>On Wed, 26 Nov 2003, Thompson, Blake wrote:
>
>> Folks,
>> I have tried to tackle this by myself and with the help of 
>all the others
>> that have been trying to resolve similar issues via this 
>newsgroup.  I have
>> come across several instances where people were finally able to claim
>> victory and tried their options, but to no avail (although, I've come
>> further in my travels than I was before).
>>
>> Platform:       Windows XP Pro
>> Cygwin is installed as 'all users.'
>>
>> The server has been started/stopped/started and 
>uninstalled/reinstalled a
>> ton of times.  I am able to verify that cron is running as a 
>service via the
>> event log and when attempting to start it I get the message 
>that it is
>> already running.  I have reinstalled cron a few times, as well.
>>
>> My crontab is as follows:
>>
>>
>> A325771@DA604290 /var/cron
>> $ crontab -l
>> # DO NOT EDIT THIS FILE - edit the master and reinstall.
>> # (/tmp/crontab.3308 installed on Wed Nov 26 13:51:07 2003)
>> # (Cron version -- $Id: crontab.c,v 1.7 2003/04/15 15:13:41 
>corinna Exp $)
>> * * * * * date >> ~/date.txt
>
>Try using "/bin/date >> /tmp/date.txt" instead.  
>Tilde-expansion may not
>be available, and PATH may not be set correctly.
>
>> (I have also tried executing a shell script versus a single command).
>>
>> I've run cron_diagnose.sh with no issues (output below)
>> [snip]
>> (By the way, I did all the stuff mentioned in the script 
>output.  Multiple
>> times.)
>>
>> I am not able to see where any output has been generated.  
>However, when
>> reviewing the event log, I come across the following entries 
>(they appear to
>> be grouped in 2's):
>>
>> Event Type:     Information
>> Event Source:   /USR/SBIN/CRON
>> Event Category: None
>> Event ID:       0
>> Date:           11/26/2003
>> Time:           2:14:00 PM
>> User:           NT AUTHORITY\SYSTEM
>> Computer:       DA604290
>> Description:
>> The description for Event ID ( 0 ) in Source ( 
>/USR/SBIN/CRON ) cannot be
>> found. The local computer may not have the necessary 
>registry information or
>> message DLL files to display messages from a remote 
>computer. You may be
>> able to use the /AUXSOURCE= flag to retrieve this 
>description; see Help and
>> Support for details. The following information is part of the event:
>> /USR/SBIN/CRON : PID 948 : (A325771) CMD (date >> ~/date.txt).
>  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>This last line is the only important part.  It says that cron 
>attempted to
>execute the command.
>
>> Event Type:     Information
>> Event Source:   /USR/SBIN/CRON
>> Event Category: None
>> Event ID:       0
>> Date:           11/26/2003
>> Time:           2:14:06 PM
>> User:           NT AUTHORITY\SYSTEM
>> Computer:       DA604290
>> Description:
>> The description for Event ID ( 0 ) in Source ( 
>/USR/SBIN/CRON ) cannot be
>> found. The local computer may not have the necessary 
>registry information or
>> message DLL files to display messages from a remote 
>computer. You may be
>> able to use the /AUXSOURCE= flag to retrieve this 
>description; see Help and
>> Support for details. The following information is part of the event:
>> /USR/SBIN/CRON : PID 608 : (A325771) MAIL (mailed 48 bytes 
>of output but got status 0x0001).
>  
>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>This shows that there was some output generated by the command 
>you tried
>to execute (most likely on stderr).  Since you didn't redirect 
>stderr in
>your command, cron attempted to mail it to you, and since you're not
>running a mail server, that attempt failed.
>
>> I know that this is probably a doink problem that has a 
>quickie solution,
>> but I have read all the README's, man pages, and 2 years 
>worth of cygwin
>> posts, but am not able to find what could be causing the 
>issue.  Please,
>> show me the error of my ways.
>>
>> Blake
>
>Try redirecting stderr from your cron command as well.  Most 
>likely cron
>couldn't find "date" (incorrect PATH setting), or couldn't access
>"~/date.txt" (no tilde expansion).
>	Igor
>-- 
>				http://cs.nyu.edu/~pechtcha/
>      |\      _,,,---,,_		pechtcha@cs.nyu.edu
>ZZZzz /,`.-'`'    -.  ;-;;,_		igor@watson.ibm.com
>     |,4-  ) )-,_. ,\ (  `'-'		Igor Pechtchanski, Ph.D.
>    '---''(_/--'  `-'\_) fL	a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!
>
>"I have since come to realize that being between your mentor 
>and his route
>to the bathroom is a major career booster."  -- Patrick Naughton
>

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]