This is the mail archive of the cygwin@cygwin.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: Open bash at the current explorer directory?


I don't think that cygwin kicks in at all.
I added that line in both .profile and .bashrc but there was no output in the log.
It still works if I choose a folder, byt not a drive!
:-?


> -----Original Message-----
> From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu] 
> Sent: den 27 september 2002 15:30
> To: Gunnar Boström
> Cc: cygwin@cygwin.com
> Subject: RE: Open bash at the current explorer directory?
> 
> 
> Gunnar,
> 
> I suggest putting an 'echo "$CYGWINSTARTHERE" >> 
> /var/log/bashhere.log' in
> your .bashrc before the 'cd' line.  Then, when you know exactly which
> value $CYGWINSTARTHERE gets, try running your command with 
> that value from
> the cmd.exe window, and see what it says...
> Once you've debugged this, don't forget to remove the 'echo' :-)
> 	Igor
> 
> On Fri, 27 Sep 2002, [iso-8859-1] Gunnar Boström wrote:
> 
> > Thanks Igor, it works with the cygpath that you sent me.
> >
> > I have still one little problem.  I can't get it to work 
> when I select a
> > drive.  I get a DOS window where some text flies by, I 
> think it's the
> > output from env, and then the window disappears.
> >
> > It works fine when I select a directory
> >
> > I have the following command in the registry (windows XP 
> pro) for both
> > Directory and Drive.
> >
> > env.exe  CYGWINSTARTHERE="%1" bash --login
> >
> > Suggestions?
> > :-)
> >
> > > -----Original Message-----
> > > From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu]
> > > Sent: den 26 september 2002 16:24
> > > To: Gunnar Boström
> > > Cc: cygwin@cygwin.com
> > > Subject: RE: Open bash at the current explorer directory?
> > >
> > >
> > > Oops, just re-read this...  Brrrr, should drink more coffee before
> > > replying to mails...  Here's another try:
> > >
> > > Gunnar,
> > > Converting short paths to long is exactly the intent of the
> > > `cygpath -w
> > > -l` line.  However, the cygpath executable in the current
> > > distribution of
> > > cygwin doesn't work.  You can simply recompile cygpath from
> > > the sources,
> > > or use the executable in the previous message (I've posted it
> > > once before,
> > > too, so you can search the archives).  The latter does
> > > involve some degree
> > > of trust... :-D
> > > Hope this is more readable.
> > >       Igor
> > >
> > > On Thu, 26 Sep 2002, Igor Pechtchanski wrote:
> > >
> > > > Gunnar,
> > > > This is exactly what the `cygpath -w -l` is supposed to do.
> > >  The problem
> > > > is that I forgot that the currently compiled cygpath is
> > > buggy (not sure
> > > > why, recompiling it from 1.3.12-4 sources works).  
> Either recompile
> > > > cygpath, or use the attached binary (compiled on Win2k,
> > > don't know if it
> > > > matters).
> > > >         Igor
> > > >
> > > > On Thu, 26 Sep 2002, [iso-8859-1] Gunnar Boström wrote:
> > > >
> > > > > I only have ntsec in $CYGWIN.
> > > > > I tried your advise below but "cygpath -w -l" returns garbage!
> > > > > The very first problem is that env CFH="%1" in the
> > > register inserts the
> > > > > short windows form.  Is it possible to force windows to
> > > insert the long
> > > > > form?
> > > > > :-)
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu]
> > > > > > Sent: den 25 september 2002 23:02
> > > > > > To: Gunnar Boström
> > > > > > Cc: cygwin@cygwin.com
> > > > > > Subject: RE: Open bash at the current explorer directory?
> > > > > >
> > > > > >
> > > > > > Gunnar,
> > > > > > I assume your $CYGWIN contains "check_case:strict",
> > > since that is the
> > > > > > setting in which the short paths won't work.  They will work
> > > > > > if $CYGWIN
> > > > > > contains "check_case:adjust".  So, you can use the following
> > > > > > sequence in
> > > > > > your .bashrc to get the correct form of the windows path:
> > > > > >
> > > > > > if [ -n "$CFH" ] ; then
> > > > > >    CFH="$(export CYGWIN="$CYGWIN check_case:adjust";cygpath
> > > > > > -w -l "$CFH")"
> > > > > >    cd "$CFH"
> > > > > >    unset CFH
> > > > > > fi
> > > > > >
> > > > > > Hope this helps,
> > > > > >       Igor
> > > > > >
> > > > > > On Wed, 25 Sep 2002, [iso-8859-1] Gunnar Boström wrote:
> > > > > >
> > > > > > > This works fine except that I get the windows short
> > > form of the
> > > > > > > directories in the CFH variable.
> > > > > > > I've tried filtering through cygpath but no luck.
> > > > > > > Any suggestion?
> > > > > > >
> > > > > > > :-?
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Frantisek Dufka [mailto:dufkaf@seznam.cz]
> > > > > > > > Sent: den 18 september 2002 10:56
> > > > > > > > To: cygwin@cygwin.com
> > > > > > > > Subject: Re: Open bash at the current explorer 
> directory?
> > > > > > > >
> > > > > > > >
> > > > > > > > I don't know how to do it without using 
> .bashrc, but this
> > > > > > > > works for me
> > > > > > > > (current cygwin, NT 4.0)
> > > > > > > >
> > > > > > > > Registry key contains:
> > > > > > > >
> > > > > > > > D:\cygwin\bin\rxvt.exe -sb -sr -sl 16384 -fn 
> fixedsys -fg
> > > > > > > > gray -bg black
> > > > > > > > -e /bin/env CFH="%1" /bin/bash --login
> > > > > > > >
> > > > > > > > .bashrc contains
> > > > > > > >
> > > > > > > > if [ "$CFH" != "" ] ; then
> > > > > > > >      cd "$CFH"
> > > > > > > >      unset CFH
> > > > > > > > fi
> > > > > > > >
> > > > > > > > No temporary files, bash.exe or .bash_profile is not
> > > > > > executed twice.
> > > > > > > > Also looks like cygpath -u is not needed, DOS 
> paths seem to
> > > > > > > > work in cd
> > > > > > > > command.
> > > > > > > >
> > > > > > > > Frantisek
> > > > > > > >
> > > > > > > > -------------------------------------
> > > > > > > > * John Daniel Doucette <john.doucette@jjmackay.ca>
> > > > > > [13-09-02 15:23]:
> > > > > > > >  > I am using Win2000 Pro, SP3.   Is there a way to
> > > invoke an
> > > > > > > > interactive bash
> > > > > > > >  > shell at a particular directory, without 
> using a .bashrc
> > > > > > > > or similar
> > > > > > > > file?
> > > > > > > >  > I.e. on the command lie alone?  The --login and
> > > -c options
> > > > > > > > appear to be
> > > > > > > >  > mutually exclusive.  I would like to be able browse
> > > > > > quickly to a
> > > > > > > > directory
> > > > > > > >  > with explorer, option/right click on the 
> directory, then
> > > > > > > > select a custom
> > > > > > > >  > "open with cygwin" option, and have the bash
> > > shell open at that
> > > > > > > >  > directory.  Has anyone tried this?
> > > > > > > >
> > > > > > > > Read this from the archive.
> > > > > > > > http://www.cygwin.com/ml/cygwin/2002-05/msg01648.html
> > > > > > > >
> > > > > > > > HTH
> > > > > > > > Jens
> > > >
> > > >
> > >
> > > --
> > >                               http://cs.nyu.edu/~pechtcha/
> > >       |\      _,,,---,,_              pechtcha@cs.nyu.edu
> > > ZZZzz /,`.-'`'    -.  ;-;;,_          igor@watson.ibm.com
> > >      |,4-  ) )-,_. ,\ (  `'-'         Igor Pechtchanski
> > >     '---''(_/--'  `-'\_) fL   a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!
> > >
> > > "Water molecules expand as they grow warmer" (C) Popular
> > > Science, Oct'02, p.51
> > >
> > >
> > >
> > >
> >
> > --
> > Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > Bug reporting:         http://cygwin.com/bugs.html
> > Documentation:         http://cygwin.com/docs.html
> > FAQ:                   http://cygwin.com/faq/
> >
> >
> 
> -- 
> 				http://cs.nyu.edu/~pechtcha/
>       |\      _,,,---,,_		pechtcha@cs.nyu.edu
> ZZZzz /,`.-'`'    -.  ;-;;,_		igor@watson.ibm.com
>      |,4-  ) )-,_. ,\ (  `'-'		Igor Pechtchanski
>     '---''(_/--'  `-'\_) fL	a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!
> 
> "Water molecules expand as they grow warmer" (C) Popular 
> Science, Oct'02, p.51
> 
> 

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]