This is the mail archive of the cygwin@cygwin.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: ssh vs. ~/.ssh


> What about your mount table? Could there
> perhaps be an entry like
>
> //d/home /d/home

Good idea, but no... the only mount points are /c and /d
(mapped to c:/ and d:/).

I searched through the whole registry for "//d" but there's
nothing there.


> Maybe there is a directory missing- the way
> /<missing>/d/home can show up as //d/home.
> Try to do a cygdrive path- set your home
> directory in /etc/passwd to /cygdrive/d/home
> and see where that takes you.

That's an interesting idea too... and I have actually tried that.
But when I change /etc/password to /cygdrive/d/scott, the relevant
line in the "ssh -vvv" output is still:
  debug1: identity file //d/scott/.ssh/identity type -1

Very strange!  I can't figure out where ssh is getting this value.

(Thanks for your help though, Peter, much appreciated.)



scott



> Scott Evans wrote:
> >
> > Sorry, perhaps I wasn't clear.  I'm trying to connect to another machine
> > (a linux machine, actually) -- I'm only using the ssh *client* on cygwin,
> > not the server.
> >
> > I know that //d is outdated.  But the weird thing is that //d doesn't
> > appear in any configuration files anywhere!
> >
> > > //d is the now outdated way that you could have
> > > accessed local drives "as network shares". This
> > > has been removed from cygwin IIRC since 1.3.2?
> > >
> > > Did you install SSHD as a service in the past?
> > > I think you have to "remove the service" and then
> > > install the new ssh as a service for things to
> > > work correctly.
> > >
> > > Have you restarted the service since you changed
> > > /etc/passwd?
> > >
> > > Have you modified the cygdrive prefix that mount
> > > uses? Or did you mount your own home directory?
> > >
> > > HTH,
> > > Peter
> > >
> > > Scott Evans wrote:
> > > >
> > > > I just upgraded to the latest Cygwin and I'm having problems connecting
> > > > via ssh without typing in my password.  This worked before.
> > > >
> > > > The first thing I found was that the latest ssh uses the home directory
> > > > from my /etc/passwd file.  I don't believe the older one did that.
> > > > So I modified my /etc/passwd to point at my local home directory (rather
> > > > than the network home directory it pointed at before).  Still no love.
> > > > But now, when I run ssh -vvv, I see that one check is looking for my
> > > > identity file in //d/scott, rather than /d/scott.  I'll paste the
> > > > output below.
> > > >
> > > > Note that if I use "ssh -i /d/scott/.ssh/identity", things work fine.
> > > >
> > > > Where is this "//d" value coming from?  HOME is set to /d/scott, my
> > > > passwd entry says /d/scott, and I have nothing anywhere that says
> > > > //d/scott.  Any ideas?
> > > >
> > > > [scott] $ ssh -vvv scott@dib
> > > > OpenSSH_2.9.9p2, SSH protocols 1.5/2.0, OpenSSL 0x0090602f
> > > > debug1: Reading configuration data /etc/ssh_config
> > > > debug1: Applying options for *
> > > > debug1: Seeding random number generator
> > > > debug1: Rhosts Authentication disabled, originating port will not be
> > > > trusted.
> > > > debug1: restore_uid
> > > > debug1: ssh_connect: getuid 12122 geteuid 12122 anon 1
> > > > debug1: Connecting to dib [192.168.1.2] port 22.
> > > > debug1: temporarily_use_uid: 12122/10513 (e=12122)
> > > > debug1: restore_uid
> > > > debug1: temporarily_use_uid: 12122/10513 (e=12122)
> > > > debug1: restore_uid
> > > > debug1: Connection established.
> > > > debug1: identity file //d/scott/.ssh/identity type -1
> > > > debug1: Remote protocol version 1.99, remote software version
> > > > OpenSSH_2.5.2p2
> > > > debug1: match: OpenSSH_2.5.2p2 pat ^OpenSSH_2\.5\.[012]
> > > > debug1: Local version string SSH-1.5-OpenSSH_2.9.9p2
> > > > debug1: Waiting for server public key.
> > > > debug1: Received server public key (768 bits) and host key (1024 bits).
> > > > debug3: check_host_in_hostfile: filename /d/scott/.ssh/known_hosts2
> > > > debug3: check_host_in_hostfile: filename /etc/ssh_known_hosts2
> > > > debug3: check_host_in_hostfile: filename /d/scott/.ssh/known_hosts2
> > > > debug3: check_host_in_hostfile: filename /etc/ssh_known_hosts2
> > > > debug3: check_host_in_hostfile: filename /d/scott/.ssh/known_hosts
> > > > debug3: check_host_in_hostfile: match line 1
> > > > debug3: check_host_in_hostfile: filename /d/scott/.ssh/known_hosts
> > > > debug3: check_host_in_hostfile: match line 1
> > > > debug1: Host 'dib' is known and matches the RSA1 host key.
> > > > debug1: Found key in /d/scott/.ssh/known_hosts:1
> > > > debug1: Encryption type: 3des
> > > > debug1: Sent encrypted session key.
> > > > debug1: Installing crc compensation attack detector.
> > > > debug1: Received encrypted confirmation.
> > > > debug1: Doing password authentication.
> > > > scott@dib's password:
> > > >
> > > > --
> > > > Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > > > Bug reporting:         http://cygwin.com/bugs.html
> > > > Documentation:         http://cygwin.com/docs.html
> > > > FAQ:                   http://cygwin.com/faq/
> > >
> > > --
> > > Your mouse has moved.
> > > Windows NT must be restarted for the change to take effect.
> > > Reboot now?  [OK]
> > >
> > > --
> > >
>
> --
> Your mouse has moved.
> Windows NT must be restarted for the change to take effect.
> Reboot now?  [OK]
>
> --
>


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]