Re: make and .exe targets

[John Fortin <fortinj@ibm.net>]

Thanks for the response :)

I knew the code compiled because I was able to compile and run it outside of
make. I just wanted a very simple 'HELLO' application to work before I move
to more complicated code.

As far as I can tell I followed the suffix rules for make and defined the
target rule correctly.  The problem seems to be in ld.exe when called from
make.

My personal e-mail is working again (thank goodness!) I don't like having to
use work e-mail for personal stuff.

Thanks,
John Fortin
fortinj@ibm.net

Suhaib M. Siddiqi wrote:

> OK,
> The reason I said check with someone else. because the code you posted
> on the Mail list compiles perfectly OK.
> I am not using a Makfile I simply cut and paste your code to a
> winhello.c file
> and typed
>
> gcc -O2 -mwindows -o winhello.exe winhello.c
>
> It compiled and works.  I gonna e-mail you the binary winhello.exe in a
> separate mail.
> I do not want to send attachments to dump all the users with
> winhello.exe.
>
> Suhaib
>
> ----
> *************************************************
> Suhaib M. Siddiqi, Ph.D.
> Senior Research Chemist
> Inspire Pharmaceuticals, Inc.
> 4222 Emperor Blvd., Suite 470
> Durham, NC 27703-8466
>
> Tel: 919-941-9777 Ext. 238
> Fax: 919-941-9797
> E-Mail: Ssiddiqi@inspirepharm.com
> http://www.inspirepharm.com
>
> ============================
>
> ----- Original Message -----
> From: <v2te2v2@us.ibm.com>
> To: Suhaib M. Siddiqi <Ssiddiqi@InspirePharm.Com>
> Cc: cygwin <cygwin@sourceware.cygnus.com>
> Sent: Friday, February 05, 1999 8:21 AM
> Subject: Re: make and .exe targets
>
> >Thank you for your 'help'.  I have been a programmer for over 5 years
> and
> >used several different makes on os2,
> >aix, and dos.  The makefile I presented should follow the rules I know
> >about.  If there is something non-standard here, I don't know what it
> is.
> >
> >I don't think you should judge experience based on a request for help.
> >
> >John Fortin, TelTech
> >FCMS Support
> >8-533-2349
> >(914) 894-2349
> >
> >
> >
> >"Suhaib M. Siddiqi" <Ssiddiqi@InspirePharm.Com> on 02/05/99 08:22:40 AM
> >
> >To:   John Fortin/Fishkill/Contr/IBM
> >cc:   "cygwin" <cygwin@sourceware.cygnus.com>
> >Subject:  Re: make and .exe targets
> >
> >
> >
> >
> >
> >
> >
> >>I used both bash and a dos window with the same results....
> >>In case this helps, I am using bash as sh.
> >>
> >
> >
> >I think something is wrong with your make file or you cygnus setup.
> >I assume you are working at IBM.  Could you please ask an experienced
> >programmer over there
> >to help with your Makefile and "bash" setup?
> >
> >Regards
> >Suhaib
> >
> >>John Fortin, TelTech
> >>FCMS Support
> >>8-533-2349
> >>(914) 894-2349
> >>
> >>
> >>
> >>"Suhaib M. Siddiqi" <Ssiddiqi@InspirePharm.Com> on 02/04/99 12:13:27
> PM
> >>
> >>To:   John Fortin/Fishkill/Contr/IBM
> >>cc:   cygwin@sourceware.cygnus.com
> >>Subject:  Re: make and .exe targets
> >>
> >>
> >>
> >>
> >>
> >>D:\home\v2te2v2\test>make winhello.exe
> >>
> >>From where is D:\home..... is comming?  Are you trying to run make
> >under
> >>a DOS shell?  If so, it will not work.
> >>You need to do this inside a bash shell.
> >>
> >>gcc -mwindows winhello.c -o winhello.exe
> >>
> >>Try this in bash shell:
> >>
> >>gcc -O -mwindows -o winhello.exe winhello.c
> >>
> >>/cygnus/CYGWIN~1/H-I586~1/i586-cygwin32/bin/ld: cannot open output
> file
> >>----
> >>*************************************************
> >>Suhaib M. Siddiqi, Ph.D.
> >>Senior Research Chemist
> >>Inspire Pharmaceuticals, Inc.
> >>4222 Emperor Blvd., Suite 470
> >>Durham, NC 27703-8466
> >>
> >>Tel: 919-941-9777 Ext. 238
> >>Fax: 919-941-9797
> >>E-Mail: Ssiddiqi@inspirepharm.com
> >>http://www.inspirepharm.com
> >>
> >>============================
> >>
> >>
> >>
> >>
> >>----- Original Message -----
> >>From: <v2te2v2@us.ibm.com>
> >>To: <cygwin@sourceware.cygnus.com>
> >>Cc: <fortinj@ibm.net>
> >>Sent: Thursday, February 04, 1999 11:36 AM
> >>Subject: make and .exe targets
> >>
> >>
> >>>
> >>>I'm a bit confused about building .exe targets. I am trying to create
> >a
> >>>default
> >>>makefile for building win32 apps.  Created the following Makefile.
> >>Make
> >>>comes
> >>>up with the proper command, but then I get an error opening
> >>winhello.exe.
> >>>See
> >>>output...  When I type the command outside of make it works fine.
> The
> >>>program is attached.
> >>>
> >>>I am using B20.1 with NT4/SP3.
> >>>
> >>>Makefile.......
> >>>
> >>>/**********************************
> >>>.SUFFIXES:
> >>>.SUFFIXES: .exe .c
> >>>.c.exe:
> >>>     gcc -mwindows $< -o $@
> >>>/**********************************
> >>>
> >>>OUTPUT........
> >>>
> >>>D:\home\v2te2v2\test>make winhello.exe
> >>>gcc -mwindows winhello.c -o winhello.exe
> >>>/cygnus/CYGWIN~1/H-I586~1/i586-cygwin32/bin/ld: cannot open output
> >file
> >>>winhello.exe
> >>>: No such file or directory
> >>>collect2: ld returned 1 exit status
> >>>make: *** [winhello.exe] Error 1
> >>>
> >>>*******************************************
> >>>
> >>>Program......
> >>>
> >>>#include <windows.h>
> >>>
> >>>LRESULT CALLBACK WndProc(HWND, UINT, WPARAM, LPARAM);
> >>>
> >>>#ifdef __CYGWIN__
> >>>WinMainCRTStartup() {
> >>>   mainCRTStartup();
> >>>};
> >>>#endif
> >>>
> >>>
> >>>
> >>>int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance,
> >>>                  PSTR szCmdLine, int iCmdShow)
> >>>{
> >>>    static char szAppName[]="HelloWin";
> >>>    HWND        hwnd;
> >>>    MSG         msg;
> >>>    WNDCLASSEX  wndclass;
> >>>
> >>>    wndclass.cbSize      = sizeof(wndclass);
> >>>    wndclass.style       = CS_HREDRAW | CS_VREDRAW;
> >>>    wndclass.lpfnWndProc = WndProc;
> >>>    wndclass.cbClsExtra  = 0;
> >>>    wndclass.cbWndExtra  = 0;
> >>>    wndclass.hInstance   = hInstance;
> >>>    wndclass.hIcon       = LoadIcon(NULL, IDI_APPLICATION);
> >>>    wndclass.hCursor     = LoadCursor(NULL, IDC_ARROW);
> >>>    wndclass.hbrBackground = (HBRUSH)GetStockObject(WHITE_BRUSH);
> >>>    wndclass.lpszMenuName  = NULL;
> >>>    wndclass.lpszClassName = szAppName;
> >>>    wndclass.hIconSm       = LoadIcon(NULL, IDI_APPLICATION);
> >>>
> >>>    RegisterClassEx(&wndclass);
> >>>
> >>>    hwnd = CreateWindow(szAppName,
> >>>                        "The Hello Program",
> >>>                        WS_OVERLAPPEDWINDOW,
> >>>                        CW_USEDEFAULT,
> >>>                        CW_USEDEFAULT,
> >>>                        CW_USEDEFAULT,
> >>>                        CW_USEDEFAULT,
> >>>                        NULL,
> >>>                        NULL,
> >>>                        hInstance,
> >>>                        NULL);
> >>>
> >>>    ShowWindow(hwnd, iCmdShow);
> >>>    UpdateWindow(hwnd);
> >>>
> >>>    while (GetMessage(&msg, NULL, 0, 0)) {
> >>>       TranslateMessage(&msg);
> >>>       DispatchMessage(&msg);
> >>>    } /* End while */
> >>>
> >>>    return msg.wParam;
> >>>    }
> >>>
> >>>
> >>>
> >>>LRESULT CALLBACK WndProc(HWND hwnd, UINT iMsg, WPARAM wParam,
> >>>LPARAM lParam)
> >>>{
> >>>   HDC            hdc;
> >>>   PAINTSTRUCT    ps;
> >>>   RECT           rect;
> >>>
> >>>   switch (iMsg) {
> >>>      case WM_CREATE:
> >>>//         PlaySound("hellowin.wav", NULL, SND_FILENAME | SND_ASYNC);
> >>>         return 0;
> >>>      case WM_PAINT:
> >>>         hdc = BeginPaint(hwnd, &ps);
> >>>         GetClientRect(hwnd, &rect);
> >>>         DrawText(hdc, "Hello, Windows NT", -1, &rect,
> >>>                  DT_SINGLELINE | DT_CENTER | DT_VCENTER);
> >>>         EndPaint(hwnd, &ps );
> >>>         return 0;
> >>>      case WM_DESTROY:
> >>>         PostQuitMessage(0);
> >>>         return 0;
> >>>   } /* End switch */
> >>>
> >>>   return DefWindowProc(hwnd, iMsg, wParam, lParam);
> >>>}
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>--
> >>Want to unsubscribe from this list?
> >>Send a message to cygwin-unsubscribe@sourceware.cygnus.com
> >>
> >>
> >
> >
> >
> >
> >
> >
> >
> >--
> >Want to unsubscribe from this list?
> >Send a message to cygwin-unsubscribe@sourceware.cygnus.com
> >
> >
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com




--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com