This is the mail archive of the cygwin-apps-cvs mailing list for the cygwin-apps project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[setup - the official Cygwin setup program] branch topic/libsolv, created. release_2.882-62-g75a2e03


        at  75a2e03ae765ca494e07124d20a061c6617e2139 (commit)


https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=75a2e03ae765ca494e07124d20a061c6617e2139

commit 75a2e03ae765ca494e07124d20a061c6617e2139
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon Nov 6 18:02:08 2017 +0000

    More crash avoidance in SolvableVersion member functions
    
    The following call-stack means we end up calling SolvableVersion methods
    before packagedb::prep(), i.e. before attributes have been internalized, so
    their values aren't available.
    
    PickView::init_headers
    PickView::refresh
    PickView::init
    ChooserPage::createListview
    ChooserPage::OnInit
    
    We call PickView::refresh again after we've computed the initial solution,
    so the columns always end up with the correct width.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=715f0ed69bb592e3fb817fb7fabbe753de7f82f9

commit 715f0ed69bb592e3fb817fb7fabbe753de7f82f9
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Nov 4 18:01:49 2017 +0000

    Correctly order preparing packagedb for chooser
    
    Do packagedb::prep() in ChooserPage::OnActivate(), as doing it in OnInit()
    is wrong, as that only gets called once (but lazily).
    
    Make packagedb::prep() idempotent after packagedb::init(), so it doesn't do
    it's work again, if we come back to chooser from a later page.
    
    Re-arrange applying command line package selection, and determining the
    initial solution, which should only happen once, but after packagedb::prep()

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=2d2a93a50ec6304d27005cc1c3093afc98e4d136

commit 2d2a93a50ec6304d27005cc1c3093afc98e4d136
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Thu Nov 2 14:15:04 2017 +0000

    Ensure packagedb and underlying solver pool is empty before we read setup.ini
    
    We need to make sure the packagedb is empty if we step backwards to here.
    
    v2:
    Also clear solver stored in SolverSolution, which holds a pool pointer

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=2d21e2434bb54fb4c0e00e38a0fe845248c9f085

commit 2d21e2434bb54fb4c0e00e38a0fe845248c9f085
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Nov 4 16:09:01 2017 +0000

    Simplify LocalDirPage::OnNext()
    
    Never go directly to IDD_CHOOSE from LocalDirPage::OnNext(), go to
    IDD_INSTATUS with WM_APP_START_SETUP_INI_DOWNLOAD (if source ==
    IDC_SOURCE_LOCALDIR), otherwise IDD_NET (which eventually leads there)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=7b90c3559c27e38b4ec5bf396886f40587957f07

commit 7b90c3559c27e38b4ec5bf396886f40587957f07
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Nov 4 15:37:58 2017 +0000

    Make do_ini() succeed if found_ini_list is empty
    
    Rather than count the number of .ini files read in do_{local,remote}_ini,
    and assume success if greater than zero, actually track if an error occured.
    
    This is a subtle change of behaviour if more than one .ini file is read:
    previously all we needed was one to succeed, now we need them all to
    succeed.
    
    (Note that site_list should never be empty, and it's still an error if we
    don't find an .ini file from a site, so the practical effect is to make
    do_local_ini succeed with an empty found_ini_list)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=2e0280064c14315dd8673168c1083a4c77fc8b27

commit 2e0280064c14315dd8673168c1083a4c77fc8b27
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon Oct 30 15:09:33 2017 +0000

    Revert "Bump the installed.db version to 4"
    
    This reverts commit cbf84482f992011eca70c560a0584bc588db80d6.
    
    Do this temporarily so people can test but go back to using setup 2.882
    without too much inconvenience...

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=e12740980f2f6955a5ea70a6b5bbe2d115829e09

commit e12740980f2f6955a5ea70a6b5bbe2d115829e09
Author: Ken Brown <kbrown@cornell.edu>
Date:   Fri Oct 27 14:47:22 2017 -0400

    Bump the installed.db version to 4
    
    Starting with the commit 'Remove the function filemanip.cc:base',
    setup correctly parses version numbers of the form e:v-r in
    installed.db.  Bump the version of installed.db to reflect the fact
    that older setup doesn't parse filenames containing colons correctly.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=2c86c4662b49edf4851e696b4c99d7ef69c7ebc4

commit 2c86c4662b49edf4851e696b4c99d7ef69c7ebc4
Author: Ken Brown <kbrown@cornell.edu>
Date:   Fri Oct 27 14:47:21 2017 -0400

    Remove the function filemanip.cc:base()
    
    This was called only on plain filenames, not full pathnames, so it was not
    needed.  Moreover, it wasn't correctly handling filenames containing colons.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=afc55683143b54274951f8c32d8ac8590eaceecf

commit afc55683143b54274951f8c32d8ac8590eaceecf
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sun Oct 29 17:20:51 2017 +0000

    Fix invalid iterator use in packagedb::removeEmptyCategories()

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=f68c26124df2fb3d21486493752ac4b391c28d55

commit f68c26124df2fb3d21486493752ac4b391c28d55
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Oct 28 13:46:19 2017 -0400

    Avoid clobbering installed.db when no setup.ini is found
    
    If no setup.ini is found, do_ini_thread is never called.  But we need
    to ensure that packagedb::read is called, or else installed.db gets
    emptied.  Move the calls to packagedb::read and other packagedb
    functions from do_ini_thread to ChooserPage::OnInit.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=92ab2021f597f19b5eb4d3da5d4916da839b1b2d

commit 92ab2021f597f19b5eb4d3da5d4916da839b1b2d
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Thu Oct 26 19:13:45 2017 +0100

    Check for libregex at configure time
    
    Done properly this should use PKG_CHECK_MODULES, rather than checking
    for the header...

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=722403152895a14e6bf1851b6c847eccb137cb03

commit 722403152895a14e6bf1851b6c847eccb137cb03
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Thu Oct 26 13:27:55 2017 +0100

    Update build instructions

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=d226574e5bbb9c4a05725c4845f68f75373fd43e

commit d226574e5bbb9c4a05725c4845f68f75373fd43e
Author: Ken Brown <kbrown@cornell.edu>
Date:   Fri Oct 20 06:59:54 2017 -0400

    Don't override a Skip selection
    
    Introduce SolverTasks::taskSkip, and generate it when the user chooses
    to Skip a package that the solver wants to install.  Implement it by
    sending a SOLVER_LOCK command on the package name.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=713719e3b5cf1716c5005fe904082d84b4fe5358

commit 713719e3b5cf1716c5005fe904082d84b4fe5358
Author: Ken Brown <kbrown@cornell.edu>
Date:   Thu Oct 19 14:44:45 2017 -0400

    Fix the functionality of taskKeep
    
    A taskKeep is generated whenever the user wants to keep an installed
    version that's different from the default_version, where the latter is
    whatever the solver has chosen.  We need to make sure that
    default_version is set appropriately wherever it is needed.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=a06f9553ebf0a8e748c582a81bcf86c74db31d00

commit a06f9553ebf0a8e748c582a81bcf86c74db31d00
Author: Ken Brown <kbrown@cornell.edu>
Date:   Tue Oct 17 08:12:48 2017 -0400

    Extend the SolvableVersion member functions to the empty package
    
    Currently some of these functions cause crashes when the package is
    empty because the libsolv function pool_id2solvable unconditionally
    dereferences its first argument ('pool').

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=5b697fbc462c4ce7d9096261ac8834d7194e1885

commit 5b697fbc462c4ce7d9096261ac8834d7194e1885
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon Oct 9 18:10:52 2017 +0100

    Take command line package/category install/uninstall into account
    
    Rather than overwriting the packagedb changes made from processing command
    line options in ChooserPage::OnInit(), use the 'initial' flag to
    changeTrust() in createListview() to take them into consideration.
    
    --upgrade-also and --force-current are now handled directly.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=9fca9240ab412d3aa8fd0220d3dbdc068e5f562d

commit 9fca9240ab412d3aa8fd0220d3dbdc068e5f562d
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon Oct 9 15:37:06 2017 +0100

    Change UI to add 'Sync' choice and change 'Test' to checkbox
    
    Set the initial update mode in UI correctly:
    - 'Sync', if --force-current option is used
    - 'Keep', if packages are selected on command line without --upgrade-also
    - 'Current', otherwise
    
    Add mapping of 'Sync' to SolverSolution::updateForce to mapping of UI
    update mode to solver update mode.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=c3856f2b60a817ec222046bdcfa3326a1d057038

commit c3856f2b60a817ec222046bdcfa3326a1d057038
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon Oct 9 15:05:22 2017 +0100

    Add distupgrade support to solver
    
    Also, ignore change transactions (these are usually vendorchange as we
    forget the vendor for installed packages)
    
    Also, don't put unknown type transactions into the transaction list

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=669c403c32e1803203eb7e6eaafc4ebc2a02b5fd

commit 669c403c32e1803203eb7e6eaafc4ebc2a02b5fd
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Sep 30 23:23:29 2017 +0100

    Non-existent source packages aren't accessible for installation
    
    Prevent the src checkbox appearing for source packages which don't exist

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=ddef397e70f7db5f990d2b00774756f4f004ef5a

commit ddef397e70f7db5f990d2b00774756f4f004ef5a
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Sep 29 14:46:46 2017 +0100

    Use solver for initial pick list when upgrading
    
    Use the solver to determine initial pick list for Curr or Test, rather than
    directly picking packages. Thus the solver's initial solution in the pending
    view should be the first thing the user sees.
    
    Note: Keep is magical, and the package db pick list gets reset by
    ChooserPage::keepClicked(), rather than going through changeTrust().
    
    We don't unify these two paths, because the trust level passed to
    changeTrust() gets recorded in PickView::defTrust and used by the line
    picker in some mysterious way, and seems to only be expected to be
    TRUST_CURR or TRUST_TEST.  There's probably a subtle bug here, in that the
    line picker might behave differently depending on if Curr or Test was
    selected before Keep.
    
    Drop passing upgrade flag to solver run after the user has made their
    selections: the picker selection now reflects what the user is asking for.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=74a08e59e521cf3c8a630999471f027cd007ecdb

commit 74a08e59e521cf3c8a630999471f027cd007ecdb
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Sep 29 14:18:44 2017 +0100

    Make removeEmptyCategories() explicit, rather than a side effect of defaultTrust()
    
    It's unclear that this can ever do anything.  The list of categories is
    built as we see packages in those categories, so I don't know how we can
    ever get an empty category.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=dd8ed6f0b3d0d2ee9e23691a2b2dd7c403ff8ea7

commit dd8ed6f0b3d0d2ee9e23691a2b2dd7c403ff8ea7
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 26 14:30:40 2017 +0100

    Handle 'Source:' lines in setup.ini
    
    This is somewhat awkward:
    
    Storing the source package by Id rather than by name is looking a bit like a
    premature optimization, but being to able to refer to source packages by Id
    is very handy.
    
    If the src pkg isn't seen until after the pkg, we don't know what it's Id
    will be.  So we have to go back and fixup the Ids after we've seen all
    packages.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=157ccf00e7f171e4cad38048d8af338d726e0fc6

commit 157ccf00e7f171e4cad38048d8af338d726e0fc6
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Tue Sep 26 19:43:12 2017 +0100

    Link with libregex rather than libgnurx
    
    Use -lregex rather than -lgnurx, as the Fedora mingw{32,63}-libgnurx
    cross-packages only contain the library under that name.
    
    (The Cygwin mingw63-{i686,x86_64}-libgnurx cross-packages have both names).

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=0a77babe95da48ce676f3de12ed6f0137144e7bc

commit 0a77babe95da48ce676f3de12ed6f0137144e7bc
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 11:39:40 2017 -0400

    Allow user to refuse the default problem solutions
    
    Add new method SolverSolution::db2trans to change the solver's
    transaction list to reflect the package database.  Use it if the user
    refuses the default problem solutions.  Reinstate warning that this
    could cause breakage.
    
    Remove PrereqPage::OnMessageCmd, which is no longer needed (and which
    disallows clicking Next if the "Accept default problem solutions" box
    is unchecked).

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=e8a3b982573a4bc5e445f4394961b748250d66a2

commit e8a3b982573a4bc5e445f4394961b748250d66a2
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 11:28:37 2017 -0400

    Add a ficitious "base" package that requires all Base packages
    
    Modify the solver's problem report so that it refers to "Base
    packages" rather than the "base" package.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=241f9d6cb7fb1c54332a0820689e2965b9f59238

commit 241f9d6cb7fb1c54332a0820689e2965b9f59238
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 11:23:04 2017 -0400

    Mention how you can see what packages were added to resolve dependencies

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=3a28cc8c0ad1cb574b65e4c6f89c05275dd688bd

commit 3a28cc8c0ad1cb574b65e4c6f89c05275dd688bd
Author: Ken Brown <kbrown@cornell.edu>
Date:   Fri Sep 8 11:16:24 2017 -0400

    Add new member function SolverSolution::trans2db
    
    This resets the package database to reflect the solver's transaction
    list.  Call this if the user clicks Back on the Prerequisite page, to
    allow reviewing and making changes before accepting the solver's
    solution.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=90da4df2f7853d7b6ad345d8541a9b1c34fdb625

commit 90da4df2f7853d7b6ad345d8541a9b1c34fdb625
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 10:50:37 2017 -0400

    Factor out SolverTasks::setTasks()
    
    Move the code from prereq.cc that makes a solver task list from packagedb
    state into a new function SolverTasks::setTasks.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=02506a72df8af478146fdd6c53426d8f1099f50b

commit 02506a72df8af478146fdd6c53426d8f1099f50b
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 14:35:58 2017 -0400

    Simplify code in install.cc
    
    Avoid passing around a packagemeta, when all we use is the package name.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=1d470644005060368d140d38f3015ad130987e06

commit 1d470644005060368d140d38f3015ad130987e06
Author: Ken Brown <kbrown@cornell.edu>
Date:   Mon Sep 4 16:44:31 2017 -0400

    Fix 'SolverTasks::taskList' typedef
    
    Remove the '&'.  This was causing source installs to all refer to the
    same package, due to the call to q.add(pkg->desired.sourcePackage(),
    SolverTasks::taskInstall) in PrereqChecker::isMet.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=b020f7fc9e3d065853cca95edc56c3789c561e5c

commit b020f7fc9e3d065853cca95edc56c3789c561e5c
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 14:27:52 2017 -0400

    Download only the packages being installed

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=9a9bad7455223f32b49ccefc10b5429729a2509a

commit 9a9bad7455223f32b49ccefc10b5429729a2509a
Author: Ken Brown <kbrown@cornell.edu>
Date:   Wed Sep 6 10:44:27 2017 -0400

    Don't create an "_installed_test_" repo
    
    This prevents libsolv from knowing that an installed test release is
    installed, since pool->installed is "_installed".

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=55d46bd142e883959b331f9213fa96a8d44d31b7

commit 55d46bd142e883959b331f9213fa96a8d44d31b7
Author: Ken Brown <kbrown@cornell.edu>
Date:   Tue Sep 5 22:22:23 2017 -0400

    Allow the installation of test packages without setting "Test" globally
    
    Instead of disabling test repos when "Test" is not selected, just give
    them lower priority than ordinary repos.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=433ae14129bb21e2903a1c2517740c289f005b17

commit 433ae14129bb21e2903a1c2517740c289f005b17
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 10:06:26 2017 -0400

    Ask solver to check dependencies of installed packages

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=7be74865722ee835829aaf2ed60961ad601a96f8

commit 7be74865722ee835829aaf2ed60961ad601a96f8
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 12:37:29 2017 -0400

    Improve the reading of installed.db
    
    When creating a packageversion for a package listed in installed.db,
    use the information for the installed version rather than the
    "current" version.  Add a new function packagedb::findBinaryVersion to
    help with this.
    
    Get as much information about an installed information as possible
    from the prior reading of setup.ini.
    
    Improve detection of installed test releases.  An installed test
    release might not appear in setup.ini because it is no longer
    available (e.g., it might have been replaced by a newer test release).
    Detect this by comparing its version to the current version.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=bb293fc114e51ffd8cdaf234d2a8296bb3ddbb5a

commit bb293fc114e51ffd8cdaf234d2a8296bb3ddbb5a
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 26 14:30:40 2017 +0100

    Add a PackageSpecification() constructor which takes a package name and version

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=b709651c5a88d83ba560766865b2f63af16f3c0a

commit b709651c5a88d83ba560766865b2f63af16f3c0a
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 07:19:55 2017 -0400

    Add SolvableVersion::obsoletes()
    
    v2: Add SolvableVersion::obsoletes(), factor out key-to-deplist code from
    SolvableVersion::depends() as SolvableVersion::deplist()

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=8a85fa8c70489dea6a03e07965e0f09989d2a0d1

commit 8a85fa8c70489dea6a03e07965e0f09989d2a0d1
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 11:57:25 2017 -0400

    Fix setup.ini parsing
    
    The IniDBBuilderPackage::process function wasn't fully resetting the
    addPackageData for a new version of a package.  This caused SHA512
    failures among other things.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=942e8b1fbc1236220a90aa75676a187ccc09be7d

commit 942e8b1fbc1236220a90aa75676a187ccc09be7d
Author: Ken Brown <kbrown@cornell.edu>
Date:   Wed Aug 30 17:36:13 2017 -0400

    Don't override a Keep selection

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=ee6f272768598eed0677218c0bf8347ef8fd5406

commit ee6f272768598eed0677218c0bf8347ef8fd5406
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon May 22 18:04:02 2017 +0100

    Add obsoletes: support
    
    Note that we need separate depends and obsoletes nodelists
    
    v2:
    Reset "obsoletes" between packages. Also add a debugging statement. (kbrown)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=0ab28d15b0222a2c2b8e04d3fddd057dbd96ec55

commit 0ab28d15b0222a2c2b8e04d3fddd057dbd96ec55
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 19 11:26:07 2017 +0100

    Download/checksum/install/uninstall what transaction wants
    
    Some of this goes rather around the houses to avoid lots of churm: In lots
    of cases, we're looking up packagemeta for a given packageversion just so we
    can use the pacakgemeta to access the name, which we could do via
    packageversion just as easily.
    
    We do actually need packagmeta for a couple of things: To note the package
    as installed/uninstalled, and to note postinstalls scripts.
    
    If IncludeSource is on source packages installs will have been added to the
    task list in post-processing, so we don't need to handle that specially
    anymore.
    
    Source packages to be installed are kept in a separate queue as they are
    installed differently to binary packages (root is /usr/src, install isn't
    recorded, etc.)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=05f2c2aaab645dc8b536b597875c2fef82a62366

commit 05f2c2aaab645dc8b536b597875c2fef82a62366
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Apr 29 15:43:52 2017 +0100

    Use solver to check for problems and produce a list of package transactions
    
    Convert chooser UI selections into a SolverTaskList
    
    Apply SolverSolution to that task list (with choice of keep, upgrade,
    upgrade with test, IncludeSource) to produce a vector of SolverTransactions.
    Store a solution object in packagedb
    
    The transaction list returned by the solver is postprocessed to add
    reinstall and IncludeSource actions
    
    Very crudely present solver problems in the PrereqChecker page UI, as text.
    Change tickbox to say "accept default solutions" and don't allow to preceed
    unless those solutions are accepted (ideally we would have a UI to choose
    solutions).  Remove warning about missing dependencies.
    
    Also pass initial trust state to PrereqChecker
    
    v2:
    Fix comment typo (kbrown)
    Tweak comment in OnActivate() (kbrown)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=ce47ca282760a3de07d256c9e9cfefbae8ca50d9

commit ce47ca282760a3de07d256c9e9cfefbae8ca50d9
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Apr 29 15:39:46 2017 +0100

    Drop in SolvableVersion as a replacement for packageversion

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=202f36768bbd45c0cb236da84424b05c0d7d1dd6

commit 202f36768bbd45c0cb236da84424b05c0d7d1dd6
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Apr 28 17:39:26 2017 +0100

    Remove packageversion class
    
    Remove packageversion, _packageversion, defaultversion classes

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=578af44f713289a327d769cd62412066e09f7baf

commit 578af44f713289a327d769cd62412066e09f7baf
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Apr 28 15:26:05 2017 +0100

    Remove cygpackage class
    
    v2:
    Fix typo in bootstrap.sh (kbrown)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=123f29dc27912a6666fd4382097b04ac7bc2f6fc

commit 123f29dc27912a6666fd4382097b04ac7bc2f6fc
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Apr 7 21:52:17 2017 +0100

    Change to using a libsolv pool for storing package information
    
    Add class SolverVersion, a wrapper around a Solvable Id. The interface is
    similar to class packageversion, the name change is just to make sure I've
    got everything.
    
    Place test packages into separate repos.
    
    Expressing that curr: packages are preferred to prev: ones when that is not
    the version number ordering should be done with epoch numbers.
    
    Wire up various bits of data in packageversion to Solvable attributes,
    including sourcepackage, stability, archive (packagesource) and depends.
    
    Store sourcePackage() by the id rather than name, for much faster lookup.
    
    SolverVersions for the same package can be ordered and compared by evr.
    
    Factor out packagedb:addBinary() and also use it in IniDBBuilder, rather
    that inlining the process of adding a package there. Add an analagous
    packagedb:addSource() to do the same thing for source packages.
    
    Change to reading installed.db after setup.ini's have been read, so we can
    supplement the installed.db packages with information from setup.ini.
    
    Make packagemeta::add_version() check for successful insertion of version.
    Record the version at a stability level. The last version wins in setting
    curr/test.
    
    Use a Solver object inside packagedb

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=ab68ed5bd3834d86d64f3e74428228b830df4ea5

commit ab68ed5bd3834d86d64f3e74428228b830df4ea5
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon Apr 24 20:17:36 2017 +0100

    Store package stability in class packageversion

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=bee9b8f2fc94386e410a8199e41b640515fbab5f

commit bee9b8f2fc94386e410a8199e41b640515fbab5f
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Wed Apr 26 16:22:30 2017 +0100

    Hoist scan() up from packageversion to packagemeta

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=e88a43f8597b9e5d83895ffd93ee094fe01635c0

commit e88a43f8597b9e5d83895ffd93ee094fe01635c0
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Tue Apr 25 23:44:08 2017 +0100

    Hoist uninstall up to Installer::uninstallOne()
    
    This calls packagemeta, which applies to packageversion (which delegates
    through packageversion_ to cygpackage) to return lines from the .lst.gz file
    (pretending that we know it contains a file list for that specific version)
    and to remove the .lst.gz file when done.
    
    Move this all up into Installer::uninstallOne(), where it's all in the same
    place as the operation it is reversing, Installer::installOne().

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=375e42110f207ba3e4250f5166f54f0b5d7f9eaa

commit 375e42110f207ba3e4250f5166f54f0b5d7f9eaa
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Wed Apr 26 15:20:14 2017 +0100

    Hoist pick() up to packagemeta
    
    We are always writing packagemeta.desired.pick(bool, packagemeta).  This
    kind of suggests something not quite right.
    
    The pick flag means install/reinstall, so despite being stored per
    packageversion, is only significant to download/install for the desired
    version.
    
    There's a slight wrinkle in that we want to also set/clear this flag for the
    source packageversion.  We can't change this to point to packagemeta rather
    than packageversion, as that may not be the same for all versions, so
    instead just track this flag separately as srcpicked.
    
    Note that there is still a complicated mapping between the state of desired
    and pick and the action represented in the UI:
    
    desired == empty, installed == desired : skip
    desired == empty, installed != desired : uninstall
    desired == installed, pick == true     : reinstall
    desired == installed, pick == false    : keep
    desired != installed, pick == true     : upgrade
    desired != installed, pick == false    : invalid

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=9a590fe9f4b67a6691ab4fb503f5289737668817

commit 9a590fe9f4b67a6691ab4fb503f5289737668817
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Tue May 23 22:19:15 2017 +0100

    Hoist addScript() etc. up from packageversion to packagemeta
    
    We're only interesting in storing scripts and later running them from the
    desired version as we install it, so despite being stored per
    packageversion, this is only significant for the desired version.
    
    Hoist it up from packageversion to packagemeta.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=a4e8c77b24150cef1ba150a8080cac778c79026a

commit a4e8c77b24150cef1ba150a8080cac778c79026a
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat May 20 16:17:44 2017 +0100

    Factor out reading installed.db
    
    Rather that doing implicitly the first time a packagedb is constructed, do
    it explicitly at a certain point in time that is early enough.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=71042e2a4732f19d687a32fac16d5773ce549c07

commit 71042e2a4732f19d687a32fac16d5773ce549c07
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 5 12:36:42 2017 +0100

    Opaque how PackageDepends is stored
    
    We want to be more opaque about how the PackageDepends for a packageversion
    is stored, so rather than exposing a pointer to a PackageDepends object
    inside class packageversion, access it by value.
    
    This also makes us be more explicit about set/get of package depends()
    
    Fix some iterations to deal with depends() returning a value rather than a
    pointer.
    
    Also adjust dumpPackageDepends() appropriately
    Also remove useless debug showing the dependency list before we build it.




Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]